Multi-station vacuum forming machine

1. Equipment composition
Equipment includes: feeding part (double feeding station), preheating part, main heating part, forming part, trimming part, punching part, hydraulic system, pneumatic system, vacuum system, water circulation system, lubrication system and electronic control system, etc.
II. Main technical parameters and requirements
2.1. Positive mold forming area: Max.: 2100mm×1250mm; Min.: 700mm×500mm
2.2. Maximum plate size: Max.: 2250mm×1270mm; Min.: 800mm×590mm
2.3. Maximum height of mold: 1050mm
ˆ 2.4, maximum forming depth: 800mm
2.5, formed sheet ABS, HIPS, CPP, sheet thickness 1.0～6.0mm. Color: white, black.
2.6. Production rhythm: 2.5-4.0mm HIPS/ABS/PSPE 120-95 mold/H 4.0-5.5mm HIPS/ABS/PSPE 95-80 mold/H (the pass rate is not less than 95%, calculated based on continuous production of 1,000 pieces, except for reasons such as molds, materials, water, electricity, and machine misoperation)
2.7. Mold change time: 15min (time from mold removal to start of production)
2.8. Molding method: Vacuum positive mold foam forming
2.9. Feeding method: double station loading (double bin)
2.10. Lower mold table load-bearing: ≥3000KG
2.11. Trimming method: automatic trimming. Depending on product specifications, the cycle time can reach ≥120 pieces/hour (one cut to ensure product trimming accuracy, +/-1mm)
2.12. Punching method: hydraulic automatic punching

Three-dimensional diagram of multi-station vacuum forming machine equipment