Motor type revolving door foaming line_Chuzhou Litong Machinery Equipment Co., Ltd.

Home > Product display > Foam type > Motor type revolving door foaming line

Product display

Molding type

Single-station vacuum forming machine (pneumatic type, hydraulic type, motor type)

Three-station box vacuum forming machine (clamp type)

Three-station box vacuum forming machine (chain type)

Multi-station vacuum forming machine

Pressure type multi-station vacuum forming machine

Automotive interior parts vacuum forming machine

Foam type

Linear hydraulic driven box foaming line

Motor type revolving door foaming line

Floor rail door foam line

Tower door foam line

Other categories

Automobile special equipment

More classification

Motor type revolving door foaming line

1. Equipment composition

Equipment includes: frame, rotary table, seven pairs of foam mold frames, opening and closing mechanism, motor drive, positioning, mold opening and closing system, water heating and cooling temperature control system, injection material transfer system variety identification system, safety exhaust system and electrical control system.
II. Main technical parameters and requirements

2.1. Number of workstations: 7 workstations

2.2. Clamp specifications (length x width): 2400mm × 1340mm

2.3. Clamp closing height: 300mm+0.5mm

2.4. Curing time: 8 minutes (adjustable within 0~999 seconds):

2.5. Blowing agent type: (POL (cyclopentane or 141b) + ISO;

2.6. Door foaming form: split foaming (door shell on the bottom, lining on the top);

2.7. Injection form: mold opening and continuous filling;

2.8, production cycle time (excluding labor time): 65s;

2.9. Capacity: about 65KW (380V, 50Hz);

2.10. Mold temperature controller power: 50KW:

2.11. Template closing height distribution: the opening and closing point of the clamp hinge is 120mm from the upper template and 180mm from the lower template

2.12. Mold closing speed: <7s (the time from the completion of foam injection to the complete closing of the mold):